
Human hair bundles
By the pack: straight, body wave and deep wave.
- Length
- Weight
- Texture
- Colour
- Weft / tip type
- —
- Hair type
Human hair extensions for businesses that order the same hair again and again. Bundles, wefts, tape-in, tips and bulk hair all run through one account, and every confirmed row is recorded under its own code.
Open your account with your first spec rows, or start with the product lines and send for a wholesale quote when you are ready.
Hair Extensions Supplier supplies human hair extensions to businesses, wholesale and to the spec you write. Salons and stylists order for their clients, distributors and stores restock their shelves, wig-making studios buy loose hair, and brands sell hair under their own name.
Every order line is written as a spec row, and every row you confirm becomes part of your account record. One buyer can hold rows across several lines at once:

All of them sit on the one account, handled in English by one contact from the first spec sheet to the repeat orders.

Three parties hold a part of every order, and each part has a clear owner.

They work to the spec rows on your account.


It is the sample you confirmed, and it carries the same spec code as our retained sample.
Each party holds one part of the order, and each part has one owner.
The reference for the row is the same at each step, because the record and the retained sample stay with your account on our side.




The four points of the pre-shipment check are set out on the home page, and how the weighing and measuring are carried out is covered on the Hair Extension Manufacturer page.
The four points of the checkEach buyer type gets an account built around the way it orders. Each group has its own page: For Salons & Stylists, For Distributors & Stores, Private Label and Bulk Human Hair.




These five rules decide how we act when an order puts two things against each other.
The row you confirmed on physical hair is the standard for that code, and every later order on that code is held to it. When a later message describes the hair differently, the approved sample decides.
Remy, Virgin and Raw are written by how the hair has been processed. Every account uses the same three descriptions, with no grade numbers and no origin names attached.
A row exists once it has a spec code. Anything agreed in a message goes onto the spec sheet before it is ordered, and you confirm the sheet, so the agreement and the record are the same thing.
When a row and its confirmed spec differ, the order ships without it, and you hear from us first. Between shipping a complete order and shipping a correct one, the rows that match ship.
The steps for a held-back rowA new shade, length or weight is added as a new row beside the original. The original code keeps its spec, so an item you already stock or reorder stays the same.

Each line is recorded by length, weight, texture and colour. Structured lines also record weft or tip type, and hair type — Remy, Virgin or Raw — is a field on every row.

By the pack: straight, body wave and deep wave.

Thin-seam weft.

Tape panels.

Machine-sewn weft.

Single strands.

Single strands for micro rings.

Loose hair for wig making, braiding and repairs.

Keratin-tip strands.
The full range is on the Human Hair Extensions page.
Get Wholesale Quote Remy, Virgin and Raw explainedSamples, colour matching, spec sheets, mixed and repeat orders, private label and the checks on either side of shipping all run through your account.


Samples made from your client's hair or a reference bundle.
Colour chart and textures


Brand products on their own codes, with packaging and labels discussed per order.
Private label accounts


Your stylists fit the hair and advise your clients. We supply the hair and keep the record behind it.
Send one row, and your account opens with it.
Request Samples
Every buyer account has one contact on our sales team. That contact handles your spec sheet, your samples, your quotes and your repeat orders.
You reach your contact through the same channels you used to first get in touch: the web form or WhatsApp. Once your account opens, the replies on spec rows, samples, quotes and reorders come from that one contact.

Your contact holds your account spec sheet, and you can ask for it at any time. The next section sets out what your contact does at each stage.
The same person handles every stage of your account, including the day that person changes.
You send your rows in whatever form you have them. Your contact sorts them into spec rows and sends them back as one spec sheet. Nothing is sampled until you confirm it.

Your contact sends the confirmed rows to sampling and comes back to you with the physical samples, each tagged with the row it was made to. A sample you confirm is recorded as a confirmed spec, and its code goes onto your account spec sheet.

Your contact prepares the quote line by line, and each line carries the code of the row it prices.

You send codes to the same contact. They go out against the spec on your record, with no need to describe the hair again.

A new shade or length goes to your contact as a new row. It is added to your account spec sheet next to the original code.

Your account spec sheet is handed over with your account. The new contact picks up every confirmed row, every code and every agreed change from that sheet. Your codes stay the same, and you keep ordering by them.

Ask your contact for your account spec sheet. It lists every spec code on your account, so you can check our record against your own stock list, your client notes or your brand's product list.

We work in English, through the channels below.


Buyers send rows in the form they already use, and all of these are accepted as they are.



| Product line | Hair type | Length | Weight | Texture | Colour | Weft / tip |
|---|---|---|---|---|---|---|
| — | — | — | — | — | — | — |
| — | — | — | — | — | — | — |
| — | — | — | — | — | — | — |
What this gives you: the same item is described the same way every time, whether you first sent it as a spreadsheet line or a photo.
The fields on the home page

Your account record holds four things, and each one has a job.
Your approved samples stay with you, each under the same code as our retained sample. Which changes need a new sample
On top of the three papers — the sample swing tag, the quote line and the packing list — every pack carries a label with the spec code of its row. Each label matches a line on the packing list.
Spec code · [Code A]Human hair bundles
Spec code · [Code B]Tape-in
Spec code · [Code C]Genius weft
Packing list on top| Spec code | Line | Check result |
|---|---|---|
| [Code A] | Human hair bundles | Matches retained sample |
| [Code B] | Tape-in | Matches retained sample |
| [Code C] | Genius weft | Matches retained sample |
The label goes on the goods, while the three papers go with the order, so the code stays with the hair after the box has been opened and the papers filed.
The code on the pack is the code on your account spec sheet.
A private label account holds your brand's products as spec rows, each with its own code and retained sample. The sample your brand approves locks the spec for that product.
The full private label route is on the Private Label Hair Extensions page.
Private label on the home page

The materials of a private label account are used for that brand's orders alone. Four kinds of material are covered, and the line that says so is printed on your spec sheet and your quote.

Every product you have confirmed under your brand.

The packaging direction agreed for your orders.
These materials are used only for your orders.

The label files and directions you send us.

The sample kept for each code on your account.
When your brand adds a product, the new row joins your account under the same terms, with its own code and retained sample. When your brand changes a shade, the new code is covered in the same way as the original, and both stay on your account record.
Send your first spec rows in any form, and your contact returns them as a spec sheet for you to confirm.

After an order arrives, there are three things you can send your contact.

A reorder: the spec codes you want again.

A new shade, length, weight or structure, added beside your existing codes.

An issue report: photos and the spec code of a row that needs a review.
Repeat orders run on the codes you already hold. Issue reports are handled as set out below. How a review runs
When a row arrives with a problem, the review runs on that row and its code.
Photograph the hair from that row and send the photos with the spec code from the pack label or the packing list.
The reference is the sample kept for that confirmed spec, the same one the row was checked against before shipment.
Your photos are checked against the retained sample for that code.
You receive a photo of the retained sample next to your arrival photo, so you see the comparison we are working from.
The review and the handling cover the row you reported, under its code.


All three open the same account, with one contact and one spec sheet.

Send your spec rows in any form, plus a client hair sample or reference bundle when colour has to match.

For buyers who know their product lines and estimated quantities. Include your spec rows and destination.

For buyers putting several lines on one order sheet.
Open your account with one spec row. Send it through the form or on WhatsApp, and your contact returns it as a spec sheet for you to confirm.