
Sew-in on a braided track
The client's own hair is braided into a track, and the weft is sewn onto it along the seam. The flat top of a genius weft lies against the braid, and a weft cut to the length of the track follows it from end to end.
Wholesale genius weft human hair extensions with a thin seam and a flat top, made to be cut at any point along the width. Each row is sampled as a whole weft for your stylist to cut before you confirm it.

We send each genius weft row as a sample weft at the full width written on your row, left uncut. Your stylist cuts it at the point they would cut on a client, looks at the cut end, and only then do you confirm the row.
We supply genius weft hair extensions wholesale for salons and the independent stylists and studios who fit wefts, for the distributors, wholesalers and beauty supply stores who resell them, and for private label brands.

Stylists order genius weft when a weft has to be shaped to the client's head. One weft can be cut into shorter pieces, so a stylist fits a full piece where the row is wide and a cut piece where it narrows, and the hair at each cut end stays in place.
Genius weft also goes in where the client wants a thin seam. With no return hair at the top, the seam line sitting on the braided track or the bead row carries less bulk than a weft with a folded top.

Extension studios with several stylists hold genius weft rows that every stylist fits from, and each stylist cuts the weft to the client in the chair.
Distributors and wholesalers stock it next to machine weft for the salons they supply, so a salon can choose the thin, cuttable seam for one install and the wider, stronger seam for another.

Beauty supply stores shelve it by length and colour, restocking each row by the code on its pack label.
Private label brands sell genius weft under their own name. The seam their stylists cut and approved on the sample is the seam that goes into every repeat of that row.



A genius weft is a human hair weft with no return hair folded over the top, so the seam is thin and the top lies flat. The hair is held tightly along the seam, and a stylist can cut the weft at any point without the hair sliding back from the cut.
A genius weft is a strip of human hair held along one seam. Three parts of it decide how it fits and how it cuts.
Genius wefts for your rows are produced in the partner workshops we work with. The spec code, the retained sample and the seam check before each shipment are held and run on our side.
A genius weft can be cut at any point across its width. The stylist sets the weft against the section of the head it will cover, marks where it has to end, and cuts straight through the seam. Both pieces stay usable: the cut piece goes into a narrower part of the row, and the remainder goes into the next row or the next client.
The cut holds because of how the hair is fixed along the seam. Every section of hair is held tightly at the seam line, so cutting through the seam leaves the hair on each side held as it was. The hair at the new end stays in line with the rest of the weft and does not work its way back along the seam. With no return hair at the top, there is no folded layer to open up at the cut either.
This is the practical difference from a machine weft. Machine weft is sewn with a wider, stronger seam, and that seam does not cut as freely. A genius weft lets the stylist decide the width of each piece in the salon, from one weft.
The width you write on the row is the width the weft arrives at. Cutting happens on your side, at the salon, to suit each client.
Cut behaviour is assessed on the sample, by your stylist, before you confirm the row. We send the sample uncut and make no claim about cut tests on our side. A cut end that looks right on the sample is what the row is confirmed against, and each shipment after that is held up against the retained weft from that same confirmed row.


A genius weft goes in by sewing or by beads, and one weft serves both.

The client's own hair is braided into a track, and the weft is sewn onto it along the seam. The flat top of a genius weft lies against the braid, and a weft cut to the length of the track follows it from end to end.

Micro beads are fixed in a row into the client's hair and the weft is held along them, with no braid. The stylist cuts the weft to the length of the bead row, and the thin seam sits along the beads.
Because one genius weft serves both methods, the fitting method does not change the row. If your salon fits genius weft both ways, you hold the same rows for both and order them under the same codes.
You can add a note to a row saying how your stylists fit it, so your contact reads the row with that in mind, but a note on the fitting method is never a separate row and never needs a new sample.

These are the points you set on a genius weft row. Width comes first: the rest of the row is set around it.
The width of the weft as it arrives, written as you specify it. Your stylists cut from this width, so set it to the way they work: the width they fit most often, or the width they prefer to cut down from.

Both are written in the form you use on your row. A buyer who orders by the weft and a buyer who orders by the pack each see weight recorded their own way on the sample's tag, on your quote and on the packing list.

Each name describes processing, and each row carries one of them.

Matched to the reference you send, such as hair you stock or a client's own hair.

Optional. Sew-in, beaded or both, for your contact's reference.



| Field | Recorded on the row | Looked at on the sample |
|---|---|---|
| Product line | Genius Weft Hair Extensions | A weft with no return hair at the top |
| Weft width | As written on your row | Full width, uncut |
| Seam | Genius weft seam | Seam thickness along the width; the cut end after a test cut |
| Hair type | Remy, Virgin or Raw | Named by how the hair was processed |
| Length | As written on your row | Hair length from the seam |
| Weight | In the form your row uses | Weighed in that form |
| Texture | To your reference | Texture beside your reference |
| Colour | A client's hair, a stocked weft or a confirmed code | Shade on the genius weft |
| Fitting note | Sew-in, beaded or both (optional) | — |
Send your genius weft rows and we return each one as a whole, uncut weft for your stylist to cut.
Request Samples One uncut weft per row
What we send. For each genius weft row on your request, we send one weft at the full width written on the row, uncut. A tag on it names its line on your spec sheet, which keeps several genius weft rows, or genius and machine weft rows arriving together, easy to tell apart.

Hold the weft by the top and run a finger and thumb along the seam from one end to the other. Look at the top from the side: there should be no folded layer of return hair over it, and the seam should stay thin and even across the whole width. This is the thickness your stylist will feel on the client's track or bead row.
Hand this to your stylist next
Hand the weft to the stylist who will fit the row. They choose a point along the width where they would cut on a client and cut straight through the seam. A stylist who cuts wefts into several pieces can make more than one cut along the same sample.
Your stylist's test cut
Look at the hair on both sides of the cut. It should stay held at the seam, in line with the rest of the weft, with no loose hair coming away at the cut and no hair sliding back along the seam.
Both sides of the cut
Your stylist's judgement on the cut is what confirms the row. We make no claim about cut tests on our side, so the cut you make on the sample is the cut test for that row.

If the seam or the cut is not what you want, tell your contact what you saw on the seam or at the cut, with a photo if you can.

If the answer is a different width, the row is changed by written confirmation.
If the answer is the wider, stronger seam of a machine weft, that is a change of line, set out in the next section, and a new sample is made.
The rest of the row is checked on the same weft: its length, its weight as your row records it, its texture beside your reference, and its colour. When you confirm, the row gets its spec code.
You keep the weft your stylist cut, and we keep a retained weft for the same code. Every later shipment of the row is compared with that retained weft, so the seam you tested is the seam you reorder.
Spec code · [Genius weft]-[Width]-[Colour]
Every genius weft row states its line and its weft width, next to the colour, texture, length, weight and hair type. Line and width stay with the row from the first sample to the last reorder.


A genius weft row and a machine weft row in the same length and colour are two separate rows, each with its own sample, its own confirmation and its own spec code. On your quote, they appear as two lines with two codes.
Switching a row from genius to machine weft, or back, is a change of line: a new row with a new sample in the new weft. The confirmed row stays on your account as it was, so a salon trying machine weft for one group of clients keeps reordering its genius weft for everyone else.
Your contact takes the width from what you send, whether a column on a spreadsheet, a weft you stock now, or a written note, and asks you before sampling if it is missing.
Because the seam and the hair stay the same, a written confirmation is enough for the new width and no new sample is made. A new colour or texture is handled under the change rules on our home page, with a fresh sample.
For private label genius weft, the seam your stylists tested and approved goes out under your name on every repeat. Packaging and labels are discussed per order, and your files are used only for your orders, as set out on our About page.
Colour for a genius weft row is confirmed on a genius weft sample, in the same weft your stylists will fit.
Send a client's hair or a weft from your stock and the colour sample is made to it, as a genius weft, for you to approve.
A shade you have already confirmed on a bundle, tape or tip row comes across as a new genius weft row, matched to the retained sample under that code, with a new weft made for your approval.
Matching one colour across lines is set out on Human Hair Extensions.



Each colour is sampled on a genius weft, in the seam your stylists will fit.
Seam thickness and seam line, across the full width, recorded for each genius weft row on the packing list.
Every genius weft row ships uncut and is held up against its retained weft first; on arrival you lay it beside the sample your stylist cut.
Wefts are shipped uncut, at the width on your row. Cutting a weft would change the goods you receive, so the cut is assessed once, by your stylist, on the sample. Before each shipment we compare the seam that makes the cut possible, the thin, even seam with no return hair, against the weft your stylist approved.
Each genius weft row on the order is compared with the retained weft of its code.
A genius weft row whose seam does not match the retained weft stays with us. You get photos from us, and we remake or replace the row to its confirmed spec before sending it. The check that every line goes through is described on our home page.
The result for each genius weft row, including the seam thickness and seam line, goes onto the packing list, row by row. Each pack carries a label with its code, so a pack on your shelf leads straight to its row and its result.
Take a weft from each genius weft row and lay it next to the approved sample your stylist cut. Compare the seam thickness along the width and the flat top. Your stylists can then cut the delivered wefts as they did the sample. If anything on a row looks wrong, send photos with the spec code; we put the retained weft of that code beside your photos and agree with you how that row is handled.



Four lines side by side: the seam, how each one cuts, how it is fixed and when to choose it.
| Photo | Line | Seam | Cutting | Fixed by | Choose it when |
|---|---|---|---|---|---|
![]() | Genius Weft | Thin seam, flat top, no return hair | At any point along the width | Sew-in on a braided track or a micro-bead row | You want a thin seam and wefts cut to each client's head |
![]() | Machine Weft | Wider, stronger sewn seam | Cuts less freely | Sew-in on a braided track or a micro-bead row | You want the wider, stronger sewn seam |
![]() | Human Hair Bundles | Wefted hair sold by the pack | — | Sew-in, and sewn onto a cap for wig making | You buy wefted hair by the pack, by texture name |
![]() | Tape-In | No seam; a tape strip along a flat panel | — | Tape panels, sandwich or single-sided | You want a flat, quick, semi-permanent install with no sewing |
Each line has its own page: Machine Weft Hair Extensions Wholesale, Human Hair Bundles Wholesale and Tape-In Hair Extensions Wholesale. Every line in the range is listed on Human Hair Extensions, I-tip, nano tip, K-tip, U-tip and bulk hair included.
Genius weft rows share an order with any other line. Several widths, lengths and colours of genius weft can go on one order with machine weft, tape-in, I-tip or bundle rows, each written as its own row. Genius and machine weft rows for the same salon arrive under their own codes on one packing list.
New genius weft rows can be sampled in one request with rows of any other line, one sample per row. Use Build a Mixed Order for the whole list, and see Wholesale Hair Extensions for reordering by code.
Build a Mixed Order Row · [Genius weft]-[Width A] · Row · [Genius weft]-[Width B]



If your genius weft rows already have codes with us, the codes and quantities are enough.

Your genius weft rows can come to us on WhatsApp or through the form below. Ask for uncut sample wefts with Request Samples, or send the codes you have confirmed with Get Wholesale Quote.